See our AGRO-Masz BTC mounted heavy plate oats
TC disc harrows are machines designed for tough jobs. They are efficient with low fuel consumption. BTC cultivators are great for stubble cultivation with a large amount of crop residue, as well as restoring fallow land for cultivation.’
The active screen located on the edge of both blade sections works well even when working at great depths. Placing the disk screens on a bearing axis makes it impossible to block the screen by pressing clods of earth. In the event of excessive depression or a large obstacle, the screen holders are attached to the frame with floating connections, allowing the screens to tilt up in the event of a collision. So you don’t need to adjust the screen, it adjusts itself to the conditions.
Features maintenance-free in hubs with cassette seal. Does daily maintenance of your old machine require too much time and attention? It’s time to forget about the frequent lubrication of bearings. Our disc harrows are equipped with maintenance-free hubs as standard, at the heart of which are working bearings identical to those used in the automotive industry. The entire system is protected with cartridge seals, which are most effective in tough field work.
OPTIMAL DISK GEOMETRY
The rake angle and cutting angle of the discs, suitable for high working speeds, allow the user to achieve the highest possible effect by mixing crop residues with the soil in the working depth range from 3 cm to 16 cm with a standard disc diameter of 620 mm. It’s not the machine that determines the job possibilities! You set the limits!
RUBBER PROTECTION 40X210 MM
Each plate is mounted on an individual holder in a system of four rubber shock absorbers. They effectively protect the plates from damage. The shock absorbers also reduce vibrations transmitted to the machine. Work without worries, without breaks.
| Model | Width (m) | Weight (kg)* | Power requirements (HP) | Number of disks (pcs) | Performance (ha/t) | Max. working depth (cm) |
|---|---|---|---|---|---|---|
| BTC30 | 3.0 | 1900 | 120 – 150 | 24 | 2,0 – 3,0 | 14 |
| BTC40H | 4.0 | 2850 | 130 – 160 | 32 | 2,8 – 4,8 | 14 |
| BTC50H | 5,0 | 3400 | 160 – 200 | 40 | 3,5 – 6,0 | 14 |
| BTC60H | 6,0 | 3900 | 200 – 250 | 48 | 4,2 – 7,2 | 14 |
* The indicated weight is approximate and may differ from the actual weight depending on the equipment and configuration.
A – Basic equipment:
- Mounted with rubber protection 40×210 mm
- Two rows of 560×4 mm or 620×6 mm type “C” washers
- Maintenance-free hubs with cartridge seal
- Distance between disc rows 100 cm
- Lateral disk shields
- Foldable side discs with working depth adjustment (3.0m version)
B2 – Mandatory equipment – rolls with holders:
- Pipe roller (diameter 600 mm)
- Rubber roller with detergents (diameter 560 mm) 2020 version
- Flexi ring roller (diameter 600 mm 60 x 10 mm)
- Standard cleaners for flexi ring roller (diameter 600 mm 60 x 10 mm)
- Crease roller with detergents (diameter 600 mm)
- Double roller (400 mm cage roller + 400 pipe roller)
- Double roller (500 mm pipe roller + 400 mm cage roller)
- Double roll (2 x 500 mm double C-profile roll)
- C-ring roller (600 mm diameter) without detergents
- V-ring roller (diameter 600 mm) without cleaning agents
- T-ring roller (diameter 600 mm) without cleaning agents
- Standard cleaning agents (for T-ring, V-ring and C-ring roller)
- Chain cleaners (for T-ring, V-ring and C-ring roller)
C – Optional extras:
- Harrow (between the second row of plates and a roller)
- Basic lights 2022 version
- Lights with adjustable handle 2022 version
- Hydraulic adjustment of the rear roller
- Front support feet 2 pcs.
- SKF hub add-on (available for 560 mm “C” disc only)
- Surcharge for disc type “C” 560 mm 6 mm thick
FOR FURTHER INFORMATION CONTACT TEL 74 75 12 05 / 60 48 77 77 77