Agro masz ANA30
The combination of a top-mounted seed drill with different types of aggregates allows for the perfect choice of seedbed combination for each type of soil. Choose a set that fits your farm perfectly. You can also use the seeder to sow cover crops. This compact seedbed combination is characterized by a very good weight distribution. Technologists and designers have devoted a lot of attention to designing a suitably lightweight kit, with a compact structure and center of gravity as close as possible to the tractor. The developed structure makes it possible to assemble the cultivation and seeding kit with relatively low-power tractors.
ACTIVE HARROW FOR COLLABORATION
A specially designed map of the tine system (the working angle of subsequent rotors with tines in relation to each other) gives the user an optimal starting position, which in turn translates into perfect clod breaking. The gap between the tines guarantees quiet work without clogging. The system of gears that form sprockets that drive teeth and position bearings is very precise. Its long lifetime is guaranteed by the cassette sealing system. As standard, the active harrow has side guards mounted on spring-loaded handles. The guards limit the radius at which the soil is thrown, thus preventing the formation of ridges when crossing passages.
ROLLERS: FINAL LEVELING SECTION
The last working section of the machine is the axle. It is mandatory equipment and we can choose it from a wide range of suggested configurations. With this section you will undoubtedly achieve optimal alignment!
| Model | Width (m) | Weight (kg)* | Number of blades (pcs) | Power requirements (HP) | Performance (ha/h) |
|---|---|---|---|---|---|
| SN300 + ANA30 | 3.0 | 2060 | 24 | 100 – 150 | 2.7 |
* The indicated weight is approximate and may differ from the actual weight depending on the equipment and configuration.
A – Basic equipment:
- Width 3 m
- Motor harrow (540 rpm) or motor harrow (540 rpm) with stone protection
- Leveling beam
B1 – Mandatory equipment – Rolls with holders:
- Tube roller (diameter 500 mm) 11 tubes
- Packing roller (diameter 560 mm) (spread 12.5 cm, for seed drill with 24 coulters)
- Packing roller (diameter 560 mm) (15 cm spread, for seed drill with 20 coulters)
- Full trapezoidal roller (diameter 560 mm) (spread 12.5 cm, for seed drill with 24 coulters)
- Full trapezoidal roller (560 mm diameter) (15 cm spread, for seed drill with 20 coulters)
- Rubber roller (diameter 560 mm) (spread 12.5 cm, for seed drill with 24 coulters) 2020 version
- Rubber roller (diameter 560 mm) (15 cm spread, for seed drill with 20 coulters) 2020 version
C – Optional extras:
- Set of hydraulic markers
- Hydraulic working depth adjustment
- Retrofit with a hydropack (only for the active device)
- Power transmission shaft (WOM)
- Surcharge for power harrow version with 1000 rpm
