See our AGRO-Masz ATO – BUGSERET DISC CULTIVATOR
TOTAL ATO
The ATO series heads are machines designed to work with lower weight tractors. Thanks to the built-in system, the hydropack can work together with grain drills or cover crop drills, creating a combination of drills that are efficient and easy to use.
SEMI-SUSPENDED DISC AGGREGATE
ATO is a semi-mounted machine. Thanks to this solution, the power requirement of the ATO + SR300 kit drops to just 100 HP.
RUBBER PROTECTION 35X210 MM
Each plate is mounted on an individual holder with a system of four rubber shock absorbers (35×210 mm). They effectively protect the plates from damage. Thanks to the protection, the user can safely operate the device even in difficult field conditions, while being sure that the machine is solidly protected against possible damage.
SIDE SCREEN
Active guards placed at the edge of both disc sections limit the ground zone deposited by the edge discs, preventing the formation of ruts at the cross connections. In case of excessive indentation or encountering a large obstacle, the mudguard holders are attached to the frame using floating joints, allowing the mudguards to tilt upwards in case of a collision. So you don’t need to adjust the screen, it will adapt to the conditions.
FOLDABLE SIDE PLATES WITH ADJUSTABLE WORKING DEPTH
TWO ROWS OF 560 MM “P” OR “C” PLATES
MAINTENANCE-FREE HUBS WITH CASSETTE STROKE
No need to start work every day with time-consuming lubrication. This machine is equipped as standard with maintenance-free hubs in which the heart works identical to bearings used in the automotive industry. The entire system is protected with cartridge seals, which are most effective in tough field work.
TIRE ROLLERS MADE FROM 185/65 15 TIRES
The hydraulically adjustable tire roller is used to compact loosened soil, ensuring a more even emergence. It is very important that flexible rubber is not very susceptible to soil sticking. In addition, the axle also performs the transportation function of the aggregate.
A – Basic equipment:
- Rubber protection 35×210 mm,
- Two rows of 560 mm washers type “P” standard or “C
- Maintenance-free hubs with cassette seal
- 75 cm disc row spacing
- Side screens
- Foldable side discs with working depth adjustment
- Seed drill hydraulic lift
- Hydraulic working depth adjustment
- Coupling device for seeder accessories SN300
- Tire roller with 185/65 15″ tires
C – Optional extras:
- Set of hydraulic row markers
| Model | Width (m) | Weight (kg)* | Power requirements (HP) | Number of disks (pcs) | Performance (ha/h) | Max. working depth (cm) |
|---|---|---|---|---|---|---|
| ATO30 | 3.0 | 1880 | 100 | 24 | 2,0 – 3,0 | 14 |
* The indicated weight is approximate and may differ from the actual weight depending on the equipment and configuration.
FOR FURTHER INFORMATION CONTACT TEL 74 75 12 05 / 60 48 77 77 77