Models
BTCHTung disc harrow
BTCH – A MACHINE FOR TOUGH JOBS
Semi-mounted disc harrows are machines designed for difficult tasks. They allow intensive and fast stubble cultivation. They are efficient with low fuel consumption. BTC harrows perform well on stubble with many crop residues and when bringing fallow fields back into use.
COMFORTABLE AND AGILE
Thanks to the integrated chassis with the transport axle in the middle (between the second disc section and the axle), the machine has achieved an optimal mass distribution coefficient and exhibits exceptional agility during turning maneuvers in the field.
RUBBER PROTECTION 40X210 MM
TWO ROWS OF 560X4 OR 620X6 TYPE “C” SHEETS AND 100 CM BETWEEN ROWS
TRANSPORT 500/50-17 AND STEERING WHEEL 10.0/80X12/10PR
SAFETY AND COMFORT
The chassis is equipped with hydraulic accumulators that ensure exceptional comfort driving the kit even on uneven ground. The pneumatic braking system supports safe driving at high speeds on the road.
MAINTENANCE-FREE HUBS WITH CASSETTE STROKE
Operator time spent on daily maintenance of the kit has been reduced to a minimum. You can forget about bearing lubrication. Our disc harrows are equipped as standard with maintenance-free hubs, at the heart of which are working bearings identical to those used in the automotive industry. The entire system is protected with cartridge seals, which are most effective in tough field work.
MAXIMUM PRECISION ADJUSTMENT REGULACJA
The optimal working depth under given conditions is controlled by the wheels on the right and left working section. They steer the discs evenly at a given depth.
A – Basic equipment:
- Rubber protection 40×210 mm
- Two rows of 560×4 or 620×6 discs type “C”
- Maintenance-free hubs with cassette seal
- 100 cm disc row spacing
- Side screens
- Hydraulic depth adjustment
- Hydraulic axle damping
B1 – Mandatory equipment – Drawbars:
- Eye pulling hook fi 50 (for hydraulically adjustable lashings, flange 110×100 mm)
- Ball hitch K80 (for hydraulically adjustable lashings, flange 110×100 mm)
- Eyebolt with cat bearing. 4 fi 51 mm (for hydraulic adjustable stays, flange 110×100 mm)
- Drawbar cat.3 type “I”
- Drawbar cat. 2 and 3 type “U” (important for homologated version)
- Drawbar cat. 4 write “U”
B2 – Mandatory equipment – Drawbar adjustment:
- Fast (standard)
- Hydraulically adjustable
B3 – Mandatory equipment – Brakes:
- Pneumatic brakes
- Pneumatic brakes (homologated)
- Pneumatic-hydraulic brakes
B4 – Mandatory equipment – Rolls with holders:
- Pipe roller (diameter 600 mm)
- Rubber roller with detergents (diameter 560 mm) 2020 version
- Flexi ring roller (diameter 600 mm 60×10 mm)
- Standard cleaners for flexi ring roller (diameter 600 mm 60×10 mm)
- Crease roller with detergents (diameter 600 mm)
- Double roller (400 mm cage roller + 400 pipe roller)
- Double roller (500 mm pipe roller + 400 mm cage roller)
- Double roll (2 x 500 mm double C-profile roll)
- Double roll (2 x 600 mm double C-profile roll)
- C-ring roller (600 mm diameter) without detergents
- V-ring roller (diameter 600 mm) without detergents
- T-ring roller (diameter 600 mm) without detergents
- Standard cleaning agents (for T-ring, V-ring and C-ring roller)
- Chain cleaners (for T-ring, V-ring and C-ring roller)
C – Optional extras:
- Set of 4 tractor track cultivators with spring protection and goose foot 250mm
- Mechanically adjustable harrow between discs and roller
- Hydraulically adjustable harrow between discs and roller 2020 version
- Light (single roll option) 2022 version
- Light (single roll option, homologated)
- Light (tandem roll option, homologated)
- Light (tandem roll option, homologated)
- Light holder with platform for SP and with steps for BTC without shaft lighting – single axle.
- Light holder with platform for SP and with steps for BTC without shaft lighting – tandem axle.
- SKF hub add-on (available for 560 mm “C” disc only)
- Surcharge for disc type “C” 560 mm 6 mm thick
BTC50
- 5.0 M wide
- weight 4680 kg
- HP range 180-220 HP
- Working depth (cm) 14
- plate 40 pcs
- HA/H 4.0-6.0
BTC60
- 6.0 M wide
- weight 5200 kg
- HP demand 220-260 HP
- Working depth (cm) 14
- plate 48 pcs
- HA/A 5.0-7.0
| Model | Width (m) | Weight (kg)* | Power requirements (HP) | Number of furrows (pcs) | Performance (ha/h) | Max. working depth (cm) |
|---|---|---|---|---|---|---|
| BTC50 | 5,0 | 4680 | 180 – 220 | 40 | 4,0 – 6,0 | 14 |
| BTC60 | 6,0 | 5200 | 220 – 260 | 48 | 5,0 – 7,0 | 14 |
* The indicated weight is approximate and may differ from the actual weight depending on the equipment and configuration.
FOR FURTHER INFORMATION CONTACT THOMAS KIER TEL 74 75 12 05 / 60 48 77 77 77